Routes not being scheduled?

[Bacon_BMW]

I've looked at the other threads but none of them have seemed to answer my problem. I have one ERJ-145 which flies a ERW-RWS-EWR-FLL-ERW on M T F S and ERW-PNS-ERW-JAX-ERW on Su W Th. My ERJ has just gotten to EWR, so I activated the flights. I go to my airline page and none of the flights are scheduled, but I go to my route map and it shows the route. Is there some sort of waiting period after you activate?

Edit: Solved

[Zortan]

Flights usually schedule when you activate them, otherwise they schedule every 10 minutes on the 0's, for example at 1:50, then at 2:00, etc. Check your routes for red triangles (route errors) and if there are any, then go ahead and fix them first. If your route is showing a Gate Error, but you do have gates, go ahead and save the route again, and that should fix the problem.

[Bacon_BMW]

Still nothing...

[gaff85]

Still nothing...

Show a screengrab of the routes page?

When did you create the route, and what is the first timing of the route?

[Unknown98]

Routes that only fly on certain days will not schedule until midnight that day. So ERW-PNS-ERW-JAX-ERW will schedule in approx. 6 hours, at midnight EWR time. It's just a limitation of the current system.

Otherwise routes schedule upon activation.

Also FYI routes now schedule every 5 mins not every 10 mins.

[Bacon_BMW]

Still nothing...

Show a screengrab of the routes page?

When did you create the route, and what is the first timing of the route?

Nothing in the matter of warnings (too lazy add an image ). I created it earlier today and activated it this evening (4:30ish). First timing is around 8:25.

Routes that only fly on certain days will not schedule until midnight that day. So ERW-PNS-ERW-JAX-ERW will schedule in approx. 6 hours, at midnight EWR time. It's just a limitation of the current system.

Otherwise routes schedule upon activation.

Also FYI routes now schedule every 5 mins not every 10 mins.

Thanks!

[Bacon_BMW]

Works now! Thank you all!

[Zortan]

Have fun!

[KleptonBaumstark]

I have same issue, I think that is a bug, I tried for a Week but any solved, I have a B744 doing route GRU x DXB... I dint can do GRU DXB GRU cause it is more than 24hrs... bus exemple, The A/C tookOf from GRU "Su" and will be ready at "M" 09:00(DXB Local time).. Soo I did create another route on Monday for the A/C return to GRU... the A/C was ready at "M" 9:00... and I did new flight to return on "M" 10:00 DXB time... (1hour after the A/C was ready) But the A/C after finished the turnaround didnt show at active fligs... show only "On ground" for the A/C take off on time, i need Cancel route, and reactivate... Its a bug? help me please

[taylor37]

        I have a similar problem
Pls help...
Going attachments with the screens
Thanks folks!