Connecting Pax
#9
(04-09-2019, 05:45 PM)fsclips Wrote: I agree that timing should play a role.

I am not sure if it could be implemented, but let's say if the time between arrival and departure of a flight is less then 40min there should be zero connecting Pax. If it is between 40min and 2:30hrs then the percentage should be quite high and then taper off until about 5hours where it should go back to zero.

Also the connections would need to make sense. A flight coming into Europe from the US would only feed into flights to Asia or within Europe, but not into a flight departing back to the US.

Again, I am not sure how all of this could be implemented and if it is even possible.

Just my two cents.

Stefan

Connections under 40 minutes are possible. I had a 30-min once at SLC and didn't miss the flight. Airports have minimum connection times but the general rule is 30 minutes minimum for domestic to domestic and 40-50 for domestic to international, international to domestic, or international to international.

Geography is also very important, as Stefan has said.
[Image: 75T19MV.png?1]


Messages In This Thread
Connecting Pax - by Unknown98 - 04-07-2019, 05:32 PM
RE: Connecting Pax - by Zortan - 04-07-2019, 06:34 PM
RE: Connecting Pax - by rlmrace - 04-08-2019, 03:21 AM
RE: Connecting Pax - by D960 - 04-08-2019, 08:49 AM
RE: Connecting Pax - by AnDrEw - 04-08-2019, 09:54 AM
RE: Connecting Pax - by Anzatax - 04-08-2019, 04:30 PM
RE: Connecting Pax - by fsclips - 04-09-2019, 05:45 PM
RE: Connecting Pax - by sfk - 04-09-2019, 05:59 PM
RE: Connecting Pax - by Zortan - 04-12-2019, 02:52 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)

About Airline Enterprise

Welcome to the official message boards of Airline Enterprise. Feel free to join the discussions, ask for help or just browse!

              Quick Links

              User Links