Posts: 69
Threads: 10
Joined: Jul 2017
Reputation:
0
I'm not sure if this adds anything to help you out, but I have all my routes numbered. I'm also getting the duplicate flights with the same flight numbers according to what I have assigned. However, the flight ID for each duplicate flight with the same numbers are sequential.
Posts: 93
Threads: 7
Joined: Sep 2016
Reputation:
1
several flights are with the same number and when I enter it says it does not belong to my company
Posts: 32
Threads: 3
Joined: Oct 2017
Reputation:
0
Airline: Southwest Airlines
01-13-2018, 06:43 PM
(This post was last modified: 01-13-2018, 06:56 PM by nino51300.)
Riddle me this. On my Airline overview, it says all of my flights have different numbers... but on the fleet overview page, everything is flight 555, and again, don't belong to my airline. Strange.
Also, nifty side note. It isn't recognizing (I think?) when legs of a route land and take off because I've created two routes that both end at 0:00 according to the system after I'm finished creating the route, a red flag usually thrown when... you know that. So why it's sending that error message, no clue.
Posts: 2,258
Threads: 138
Joined: Jul 2016
Reputation:
11
01-13-2018, 10:36 PM
(This post was last modified: 01-13-2018, 10:39 PM by Unknown98.)
There's going to be various issues across the game now that I sort of know what's going on. I'll have to slowly go through and fix all of them as they pop up.
To put it in basic terms, the new server is using different and updated software, and as a result, is much more strict. Minor mistakes in the code that I could get away with on the old server, I cannot get away with anymore. Thus some things fail now, when they worked fine before.
(01-13-2018, 06:43 PM)nino51300 Wrote: Also, nifty side note. It isn't recognizing (I think?) when legs of a route land and take off because I've created two routes that both end at 0:00 according to the system after I'm finished creating the route, a red flag usually thrown when... you know that. So why it's sending that error message, no clue.
^ That should be fixed now.
I am the developer of Airline Enterprise
Posts: 199
Threads: 52
Joined: Sep 2017
Reputation:
0
Airline: Emerald Aer
Are you going to reset all routes? as 90% of my aircraft are in a locked status, they are all flying since Yesterday, could not send any manual flights today for unassigned aircraft (assigned aircraft seemed to work fine).
Posts: 2,258
Threads: 138
Joined: Jul 2016
Reputation:
11
01-14-2018, 12:54 AM
(This post was last modified: 01-14-2018, 01:00 AM by Unknown98.)
Just done that.
You may still have issues with routes scheduling 24 hours later than they should be. Still need to work on that.
As far as flight duplication... let me know if it happens, but I haven't experienced it.
Quick flights have been temporarily disabled as they were not working after the server move and would result in stuck aircraft. I'll work on getting those back up quickly so ya'll can re-position aircraft.
Oh and I fixed the flight number issue. The problem was a comma. Old server, comma = OK. New server, apparently, no bueno. ¯\_(ツ)_/¯
I am the developer of Airline Enterprise
Posts: 303
Threads: 31
Joined: Sep 2016
Reputation:
0
01-14-2018, 01:25 AM
(This post was last modified: 01-14-2018, 01:28 AM by Ryan97.)
Thanksssss unk you the man
Just set up my routes with what appears to be no issues at all
Posts: 240
Threads: 13
Joined: Dec 2017
Reputation:
0
Yup, currently using scheduled routes to position my ACs. With that being said, scheduled routes works as intended. Thanks!
Posts: 32
Threads: 3
Joined: Oct 2017
Reputation:
0
Airline: Southwest Airlines
For some reason I have a bunch of planes not showing up in my active routes. Could this be because I just have 85 routes or is there a glitch? I truthfully do not know if they're being scheduled