Revamped Routes System

[Unknown98]

Are those flights that are flying at the same time part of the same route, I assume? Must be some kind of issue with scheduling (what I'm trying to fix right now), i.e. the game gets confused on dates/times when figuring the schedules of some routes. With long haul flights like that, it's probably supposed to make the 2nd flight depart on the FOLLOWING day, but the system didn't calculate correctly and they both got scheduled for the same day, thus 2 flights at once. That's most likely what happened, anyway.

After they land, try deactivating them and then activating again, and see if it still does the same thing.

The changes I made today do not affect anything that's already on the schedule or in-flight.

[squaregatescrub]

For some reason, even my short flights (less than 2,500km) gets affected by that bug. It will fly the first 1 or 2 legs then stops. Hopefully that fix you did today will make a positive impact.

[PolarMonkey]

Yes, those planes fly 2 routes, 3501 (YYZ - HND) & 3502 (HND - YYZ) with PA8701 is one route, 3503 (YYZ - HND) & 3504 (HND - YYZ) with PA4702 is the second. I deactivated, cancelled, and reactivated those flights, and it is still showing up in the scheduled flights as landing in HND then back at YYZ 2 hours later for both routes. I looked at some of my other long haul flights and haven't seen anything similar with them. Another thing I thought was odd with the flights was that the first one doesn't land for about another 44 hours, do it doesn't look like it is even taking off tomorrow, which would go along with your issue with scheduling, thinking that the plane is already occupied tomorrow.

As for my other flights, I think that one is on me. I forgot to check where my planes were before I deleted my routes and noticed that they were not at the starting airports. The planes that have already made it back to their start points seem to be scheduled as planned, so I'll have to wait until the morning to check on the others.

[airlinemanage]

sorry to interrupt, but may help u to figure out whats the problem.

I have an aircraft that flies A-B, it skips B-A route, but then while the aircraft is at B, it then flies A-C. Seems like some codes are skipped.

[Unknown98]

Yes, those planes fly 2 routes, 3501 (YYZ - HND) & 3502 (HND - YYZ) with PA8701 is one route, 3503 (YYZ - HND) & 3504 (HND - YYZ) with PA4702 is the second. I deactivated, cancelled, and reactivated those flights, and it is still showing up in the scheduled flights as landing in HND then back at YYZ 2 hours later for both routes. I looked at some of my other long haul flights and haven't seen anything similar with them. Another thing I thought was odd with the flights was that the first one doesn't land for about another 44 hours, do it doesn't look like it is even taking off tomorrow, which would go along with your issue with scheduling, thinking that the plane is already occupied tomorrow.

As for my other flights, I think that one is on me. I forgot to check where my planes were before I deleted my routes and noticed that they were not at the starting airports. The planes that have already made it back to their start points seem to be scheduled as planned, so I'll have to wait until the morning to check on the others.

I see why this is happening now. The return trip (HND-YYZ) is delayed so much that it should be adding two additional days. However the game isn't set up to handle that, so it only adds the 1 day. I'm trying to fix that now. I noticed, if I change the departure at YYZ so that the route departs today rather than tomorrow, it all works fine. (it's currently 12:47pm at YYZ, so if I change the departure to 13:00, it schedules correctly. But if I leave the departure at 08:00, the game messes up when calculating the additional day)

sorry to interrupt, but may help u to figure out whats the problem.

I have an aircraft that flies A-B, it skips B-A route, but then while the aircraft is at B, it then flies A-C. Seems like some codes are skipped.

Sounds like a separate issue... can you give me the route ID of that route so I can duplicate and test?

[Ryan97]

Think i am seeing the same issue as airlinemanage. I have a route set up to fly MAN-BCN-MAN-OSL-MAN-CPH-MAN. How ever the only legs being schuduled are MAN-BCN, OSL-MAN, MAN-CPH -MAN. The outbound to OSL and inbound from BCN to MAN are skipped

Route ID is : 1935d3ef9bf593c4749be34a65a9d32d

[Unknown98]

Yes, those planes fly 2 routes, 3501 (YYZ - HND) & 3502 (HND - YYZ) with PA8701 is one route, 3503 (YYZ - HND) & 3504 (HND - YYZ) with PA4702 is the second.  I deactivated, cancelled, and reactivated those flights, and it is still showing up in the scheduled flights as landing in HND then back at YYZ 2 hours later for both routes.  I looked at some of my other long haul flights and haven't seen anything similar with them.  Another thing I thought was odd with the flights was that the first one doesn't land for about another 44 hours, do it doesn't look like it is even taking off tomorrow, which would go along with your issue with scheduling, thinking that the plane is already occupied tomorrow.

As for my other flights, I think that one is on me.  I forgot to check where my planes were before I deleted my routes and noticed that they were not at the starting airports.  The planes that have already made it back to their start points seem to be scheduled as planned, so I'll have to wait until the morning to check on the others.

I see why this is happening now. The return trip (HND-YYZ) is delayed so much that it should be adding two additional days. However the game isn't set up to handle that, so it only adds the 1 day. I'm trying to fix that now. I noticed, if I change the departure at YYZ so that the route departs today rather than tomorrow, it all works fine. (it's currently 12:47pm at YYZ, so if I change the departure to 13:00, it schedules correctly. But if I leave the departure at 08:00, the game messes up when calculating the additional day)

So... the issue was not that the game was scheduling flights incorrectly. It was actually scheduling them just fine. The issue was the the ETA displayed on the active flights page was not correct. I've fixed that now. See my re-creation of your flight:

Think i am seeing the same issue as airlinemanage. I have a route set up to fly MAN-BCN-MAN-OSL-MAN-CPH-MAN. How ever the only legs being schuduled are MAN-BCN, OSL-MAN, MAN-CPH -MAN. The outbound to OSL and inbound from BCN to MAN are skipped

Route ID is : 1935d3ef9bf593c4749be34a65a9d32d

thanks I'll start looking into this issue now

[Ryan97]

Yes, those planes fly 2 routes, 3501 (YYZ - HND) & 3502 (HND - YYZ) with PA8701 is one route, 3503 (YYZ - HND) & 3504 (HND - YYZ) with PA4702 is the second.  I deactivated, cancelled, and reactivated those flights, and it is still showing up in the scheduled flights as landing in HND then back at YYZ 2 hours later for both routes.  I looked at some of my other long haul flights and haven't seen anything similar with them.  Another thing I thought was odd with the flights was that the first one doesn't land for about another 44 hours, do it doesn't look like it is even taking off tomorrow, which would go along with your issue with scheduling, thinking that the plane is already occupied tomorrow.

As for my other flights, I think that one is on me.  I forgot to check where my planes were before I deleted my routes and noticed that they were not at the starting airports.  The planes that have already made it back to their start points seem to be scheduled as planned, so I'll have to wait until the morning to check on the others.

I see why this is happening now. The return trip (HND-YYZ) is delayed so much that it should be adding two additional days. However the game isn't set up to handle that, so it only adds the 1 day. I'm trying to fix that now. I noticed, if I change the departure at YYZ so that the route departs today rather than tomorrow, it all works fine. (it's currently 12:47pm at YYZ, so if I change the departure to 13:00, it schedules correctly. But if I leave the departure at 08:00, the game messes up when calculating the additional day)

So... the issue was not that the game was scheduling flights incorrectly. It was actually scheduling them just fine. The issue was the the ETA displayed on the active flights page was not correct. I've fixed that now. See my re-creation of your flight:

Think i am seeing the same issue as airlinemanage. I have a route set up to fly MAN-BCN-MAN-OSL-MAN-CPH-MAN. How ever the only legs being schuduled are MAN-BCN, OSL-MAN, MAN-CPH -MAN. The outbound to OSL and inbound from BCN to MAN are skipped

Route ID is : 1935d3ef9bf593c4749be34a65a9d32d

thanks I'll start looking into this issue now

Okay thanks, just an FYI this is not occurring with every route. I have created around 4 routes this evening and this is the only one that i have seen the issue with.

[Unknown98]

Okay thanks, just an FYI this is not occurring with every route. I have created around 4 routes this evening and this is the only one that i have seen the issue with.

Well... this is really strange. I duplicated this route for my airline line-for-line, leased the required gates, and it all scheduled fine:



I don't know   Need to look at it more I suppose...

[Ryan97]

Okay looks like another display issue Unk. Schudules fine on the flights page. Its the arrival and departure screens that aren't displaying all the legs