10-06-2018, 10:32 PM
I just made some alterations to the code and the way that it handles slot assignment. From my small testing this afternoon it seems to work correctly, but that being said it also seemed to work correctly last time as well. The new code is live now so just to explain how it works again:
Upon landing the aircraft uses up one slot. It is just a counter, +1 every time a plane lands at one of your airports. Then at midnight UTC the counter is reset and it all starts over again.
Only landings use up a slot, not takeoffs. So if you land 3 times a day at ATL, your slot usage at ATL should read (3) in the parenthesis. As long as all 3 landings are in the same UTC day. So if you are seeing numbers that are higher than they should be let me know.
Upon landing the aircraft uses up one slot. It is just a counter, +1 every time a plane lands at one of your airports. Then at midnight UTC the counter is reset and it all starts over again.
Only landings use up a slot, not takeoffs. So if you land 3 times a day at ATL, your slot usage at ATL should read (3) in the parenthesis. As long as all 3 landings are in the same UTC day. So if you are seeing numbers that are higher than they should be let me know.
I am the developer of Airline Enterprise